Kasa Smart 3 Way Switch HS210 KIT, Needs Neutral Wire, 2.4GHz Wi-Fi Light Switch works with Alexa and Google Home, UL Certified, No Hub Required, 2-Pack
|Current Rating||15 Amps|
|Contact Type||Normally Closed|
|Item Dimensions LxWxH||6.3 x 5.1 x 2.8 inches|
|Mounting Type||Wall Mount|
|Actuator Type||Push Button|
- Easy guided install: Neutral wire is required, standard wall plate size. No need to understand complex switch wiring or master vs auxiliary switch configurations, The Kasa app guides you through easy step by step installation. For non-dimmable lights, 2.4 GHz Wi-Fi connection required
- 3-way or single pole: Using it as 3-way or single pole switch to control the light from 1 or 2 locations to replace your traditional 3-way switch. Best for top and bottom of a staircase or from house to garage etc
- Control from anywhere & voice control: Monitor your lights status. Turn electronics on and off from anywhere with your smartphone using the Kasa app, whether you are at home, in the office or on vacation. Enjoy the hands-free convenience of controlling the lights in your home with your voice via Amazon Alexa or Google Assistant
- Scheduling: Use timer or countdown schedules to set your smart switch to automatically turn on and off while you’re home or away. Enable ’away mode’ to randomly switch on and off to trick potential intruders
- Trusted and reliable: Designed and developed in silicon valley, Kasa is trusted by over 4 million users. UL certified for safety use.
Device detailed description
The HS210 Smart Switch Kit makes it easy to replace traditional 3 way switches commonly found in living rooms, halls, or stairways where 2 switches control the same light. The HS210 kit includes 2 smart switches specially designed to work together with 3 way switch wiring. There’s no need to be an expert on complex 3 way switch, wiring or confusing master vs auxiliary smart switch settings. The Kasa app guides you through each step of the installation, connecting to your home Wi-Fi, and providing control from anywhere. For convenient hands free controls it easily connects with Amazon Echo or Google Assistant voice assistants. Protocols supported: IEEE 802.11b/g/n, System requirement: Android 4.1 or higher iOS 9.0 or higher, Wireless type: 2.4GHz 1T1R.
Features and specification
|Country of Origin|
|Item Package Quantity||
Qty 2 – HS210, 2 Wall Plates, 4 Mounting Screws, 4 Wire Nuts, Quick Start Guide
6.3 x 5.1 x 2.8 inches
|Battery Cell Type|
Frequently asked question
In 3way switch setup, power goes into 1st switch, through 2nd switch then to the light. The smart switch must be the 1st switch. If you put the smart switch 2nd, it will have power only when the 1st manual switch is in 1 position, and lose power when the manual switch is other position. So, technically, you only ne… see more In 3way switch setup, power goes into 1st switch, through 2nd switch then to the light. The smart switch must be the 1st switch. If you put the smart switch 2nd, it will have power only when the 1st manual switch is in 1 position, and lose power when the manual switch is other position. So, technically, you only need one smart switch for 3-way switching to be functional, but you must put the smart switch as the 1st switch.
Yes - you can simply press the physical switch on the device to manually turn the lights on or off. Regards, … see more Yes - you can simply press the physical switch on the device to manually turn the lights on or off. Regards, TP-Link Support
Yes, you can. I don’t know why people have had issues, but I have installed dozens of various Kasa switches and always use third party decorator plates. They have always sat flush against the sheet rock. If there is a gap, you are either not using flat headed screws to attach the switch, or it’s not installed all of the way.
You ever get the one 3-way switch to work? I tried and can't seem to get it to work with only 1 switch installed. I have power and I when I switch the light off with my phone I can hear a click in the switch, but the lights do not turn on or off. During the installation process the final steps walk through a process… see more You ever get the one 3-way switch to work? I tried and can't seem to get it to work with only 1 switch installed. I have power and I when I switch the light off with my phone I can hear a click in the switch, but the lights do not turn on or off. During the installation process the final steps walk through a process to pair the 2 switches. I just 'nexted' through the pairing steps. Not sure if it not working because it is not paired with the other switch.
3 reviews for Kasa Smart 3 Way Switch HS210 KIT, Needs Neutral Wire, 2.4GHz Wi-Fi Light Switch works with Alexa and Google Home, UL Certified, No Hub Required, 2-Pack
03 Customer(s) recommended this item
Reviewed by 0 customer(s)
You do NOT need to use both of these switches for a single 3 or 4-way setup.
Hi, I am an electrician and suspected that only one of these two switches would be necessary to make the circuit work properly. My biggest concern was that the app functionality may be lost by only using one of the WiFi 3-way switches. I can assure you that all app functions remain intact. I have split two sets of these TP-Link HS 210 switches and used individually on four completely separate 3- way switching circuits (one of them was actually a 4-way w/four switches controlling a set of lights.) I also have tested and verified full functionality w/ Alexa.
To do this setup just replace one of the 3-way switches in the circuit and do the app setup as usual. When prompted to do the setup on the 2nd switch in the circuit just keep pressing done as if you had followed the instructions. This will complete the setup and allow you to use the app to control your 3 or 4-way circuits just like any other TP-Link devices. Repeat the previous steps with the 2nd switch in the package and BOOM…. you are done. If having matching switches is more important to you than saving hundreds of dollars, please disregard this post. Good luck.07/14/2022Verified Purchase
I Had To Install Both Switches
For the product itself, these are fantastic. I previously installed the single pole and it’s been working great, so I jumped on this 3-way version when I saw the price drop recently. My only wish is that it would work natively with Samsung Smartthings (now that I’ve also jumped into that pool). For now, I’m content with the Kasa app and controlling the lights through Google/Alexa.
The main reason I want to write this review is to provide another data point in the ‘Do you have to install both switches’ question. Unfortunately, I DID have to install both switches. My circuit has two 3-way switches with two 4-way switches similar to SJ’s review.
When I initially just installed one, the actual switch worked fine to toggle the lights on and off, but the switches and the app never knew the state of the lights. I figured this because the light on the switch was always on, which seems to indicate that it always thought the lights were off. More importantly, the app only toggled the lights on/off every other press. Basically, the lights would only respond (turn on or off) when the app thinks it’s turning the lights on. If the app thinks it’s turning the lights off, nothing happened. Finally, I could only toggle the lights on/off by telling Alexa to turn the lights on. Asked Alexa to turn the lights off did nothing.
Anyway, everything is working perfectly now that I’m using them as designed. Just wanted to provide more information for possible buyers.07/14/2022Verified Purchase
Great Job TP-Link!!
Finally, a 3-way smart switch by TP-Link!!! I have waited for these for quite some time now and bought a set the first day they became available. This is my 30th TP-Link smart switch/plug and they never disappoint!!
The HS210 3-way switch kit was very easy to install using the Kasa app. It walks you through the step by step installation all the way down to reminding you to take a picture of all labeled wires before you disconnect the old switches. Configuration to your Wifi network is a breeze, just like their standard single pole smart switch. Obviously, there are a few more steps involved given it sets up both switches within the same process, one at a time. I have lots of practice using their setup app so it only took 10 mins tops to compete.
I installed it in the same switch box together with a single pole TP Link switch and will say that it’s a challenge to get everything to fit. Extra wires along with the large backs on these things make for little room. I didn’t connect the ground wires to save some space, just cut it short and taped it off.
My only complaint is that the white circle light on the switch itself is dimmer than the standard switches so if you’re picky like me it doesn’t look uniform, especially if installed next to each other.
I’ll be purchasing these sets for the rest of my 3-ways. Definitely happy with the product!!
First picture attached is next to a single pole TP-Link and second is next to standard switch (not a smart switch).04/03/2022Verified Purchase