Enbrighten Zigbee Smart Light Switch with QuickFit and SimpleWire, Pairs Directly with Echo 4th Gen/Echo Show 10 (All)/Echo Studio/Echo Plus (All)/Eero Pro 6, White & Light Almond, 43076

(6 customer reviews)
Item Dimensions LxWxH1.13 x 1.75 x 4.13 inches
Circuit Type3-way
Mounting TypeWall Mount
Controller TypeVera, Google Assistant, Amazon Alexa, SmartThings
  • EASY VOICE CONTROL – Pair directly with Echo Studio, Echo Show 10, or 1st and 2nd generation Echo Plus immediately out of the package for easy voice command of connected devices. No additional equipment is required for use with these Echo models. Other Alexa and Google Assistant products can also be used for voice control when connected through a compatible Zigbee hub. SMARTTHINGS USERS: The switch requires a device-type change in the SmartThings IDE to avoid being added as a “Thing.” A certified solution is in progress.
  • CONVENIENT DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Zigbee models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
  • RAPID INSTALLATION WITH SIMPLEWIRE – Auto-detecting line/load terminals support fast and easy installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-gang setups.
  • VERSATILE USE – Requires in-wall installation with hardwired connections – neutral wire REQUIRED. Supports 3-way and other multi-switch configurations when paired with up to four add-on switches – model 46199. Includes white and light almond paddles (wallplate not included). Works with LED, CFL, incandescent, and halogen bulbs and other devices.
  • TRUSTED NETWORK – Zigbee 3. 0 is forward and backward compatible and does not use well-known network keys, which allows reliable, safe home automation. Certified device-to-device interoperability and a proven mesh network eliminate single points of failure while supporting large networks. The smart switch also extends your Zigbee signal by up to 150ft.
SKU: B08428GHM8 Category:
11 People watching this product now!

Device detailed description

Your entire home is smarter with the Enbrighten Zigbee In-Wall Smart Switch with QuickFit and SimpleWire . Enjoy extensive control of permanently installed lights, fans and other fixtures when paired with a compatible gateway. For further convenience, the smart switch connects directly to the latest Alexa products, including Echo Studio and Echo Show 10 as well as first- and second-generation Echo Plus, for voice commands. Voice control and remote operation using additional devices is also available through Zigbee-compatible hubs.

Features and specification

Brand Smart devices brand

Integration Supported smart home integration

Interface Smart device connectivity interface

Manufacturer Smart device manufacturer


Country of Origin

Color Available colors

Voltage (V)

Wattage (W)

Item Package Quantity


Batteries Required?

Warranty Description

‎5-year limited

Product Dimensions

‎1.13 x 1.75 x 4.13 inches


Power Source

Certification Smart device certification

Mounting Type



Controller Type

, , ,

Included Components

‎Smart Switch

Item Weight

Control Method

Circuit Type

Connectivity Protocol


Product guides and documentsUser Manual (PDF)

Frequently asked question

Will the paired Zigbee hub override the switch state if it was manually switched to off at the paddle switch and can you lock out manual switch?

The manual switch cannot be locked out. The Manual switch and Zigbee hub work together. If you turn it off using the hub or manually, you can always control it from the other whenever you need to. Controlling Manually doesnt stop you from controlling it remotely the next time you need to.

My switch is connected through my amazon echo. how do i change when the notification led on the switch is on?

From the manual, Cycle LED light The LED below the switch acts as a guide light or status indicator. … see more From the manual, Cycle LED light The LED below the switch acts as a guide light or status indicator. How to cycle through options: Press up three times and down once quickly. 1. LED is ON when the load is OFF (guide light in the dark) (default) 2. LED is ON when the load is ON (indicates the switch is ON) 3. LED is always OFF

Can these 'fade-on' and 'fade-off' over 2-5 secs? If not what will? Thank you!

The Enbrighten 43076 is not designed as a dimmer and cannot fade on or off.

Wha is the difference between 43076 and 43080 model?

76 is the On/Off Switch and 80 is the Dimmer model

6 reviews for Enbrighten Zigbee Smart Light Switch with QuickFit and SimpleWire, Pairs Directly with Echo 4th Gen/Echo Show 10 (All)/Echo Studio/Echo Plus (All)/Eero Pro 6, White & Light Almond, 43076


97 %


97 %


97 %

Reviewed by 0 customer(s)

Sort by

  • Anonymous

    Works like a charm. Easy to install. Way better than Wemo.

    I use the switch to replace my Wemo light switch. The Wemo switch constantly disconnects from my Wi-Fi and has been nothing but trouble. I installed the switch and connected it directly to my Amazon echo and it works flawlessly.

    Verified Purchase

    Share on

  • Anonymous

    Easy to install and connect to Alexa

    This was easy to install and connect to an Alexa that has a built in Zigbee hub.

    Verified Purchase

    Share on

  • Anonymous

    Pairs great with Xfinity Home

    Works great with Xfinity Home. Easy to install and pair. However, I noticed that the more zigbee 3.0 smart switches that I installed the more often my older centralite switches got kicked off meaning communication errors. Overall, it’s a great product.

    Verified Purchase

    Share on

  • Anonymous

    Works with old 2nd generation echo plus.

    I’m totally blind. The reason I got this switch is I already had 2 of them from another place and found that they worked with my old 2ng generation Echo plus. That is one of the things I was looking for. I also like this switch being I can configure it so that the LED on the light itself stays off.
    I found at least for me to get this switch online to the Echo, the best way is to have an echo by your electrical box. That away when you flip the breaker on for taht switch, you can tell teh Alexa scan for new devices. I’ve found in 2 of the three times the switches came online with no issues. In my case, the person who was helping me didn’t tell me when they had one of the switches power up and it was minutes later. Then at that point, I played a very hard time getting the switch to go online to the Echo. But trying and trying again and again I won out.
    I like this switch being I can press the up button(ON) 3 times followed by the down button (OFF) to change how the LED behaves. Also pressing the Up button(ON) 10 times quickly will forc ea reset on the switch and it will forget its programming. This is more shaped like a rocker switch. However the switch doesn’t stay depressed when you press the Up/Down. That is OK with me. I also like the fact that it comes with 2 colors to select from. So hopefully in this case, you can find the one that works for you.
    I used this switch in the bathroom to control the exhaust fan. I have a door sensor on the door. So when someone closes the bathroom door, the fan comes on and when they open the door, the fan goes off. I created 2 routines within Alexa to control the fan with the door sensor Open/Close. Yeh I could have used a motion sensor to do the same thing. But sometimes you just walk into the bathroom to wash your hands and don’t close the door. So didn’t tie it to the motion detector. That is what controls the light!

    Verified Purchase

    Share on

  • Anonymous

    Pairs easily with Hubitat Elevation also.

    I had an earlier version of this switch die on me. I wanted to replace it, so I purchased this one since it would arrive faster than the warranty replacement. I like that it is now shallower than the old model which makes it easier to fit in the box.
    It linked easily with the Hubitat Elevation hub using the GE Zigbee Switch driver. It responds quickly to commands from the hub. I’m happy with this switch. Hopefully, it will hold up better than the one it replaced.

    Verified Purchase

    Share on

  • Anonymous

    Works well

    Works well on zigbee, good feedback. On / off only as in the description. Fairly expensive. Install is very easy as it has side clamping terminals. Only downside is it requires a little more force than some other decora switches.

    Verified Purchase

    Share on

Leave feedback about this

Your email address will not be published.