Enbrighten Zigbee Smart Light Switch with QuickFit and SimpleWire, Pairs Directly with Echo 4th Gen/Echo Show 10 (All)/Echo Studio/Echo Plus (All)/Eero Pro 6, Toggle, White, 43084

(6 customer reviews)
Switch StyleToggle Switch
Item Dimensions LxWxH1.13 x 1.75 x 4.13 inches
Circuit Type3-way
Mounting TypeWall Mount
  • EASY VOICE CONTROL – Pair directly with Echo Studio, Echo Show 10, or 1st and 2nd generation Echo Plus immediately out of the package for easy voice command of connected devices. No additional equipment is required for use with these Echo models. Other Alexa and Google Assistant products can also be used for voice control when connected through a compatible Zigbee hub. SMARTTHINGS USERS: The switch requires a device-type change in the SmartThings IDE to avoid being added as a “Thing.” A certified solution is in progress.
  • CONVENIENT DESIGN – Improved components reduced the housing depth by up to 20 percent compared to previous Zigbee models and eliminated the need for heat tabs. QuickFit enhancements are the ideal smart solution for older-style switch boxes, multi-gang configurations or any other application with limited space.
  • RAPID INSTALLATION WITH SIMPLEWIRE – Auto-detecting line/load terminals support fast and easy installation by identifying line and load wires and configuring the switch accordingly. Dual ground ports, which are offset to avoid switch box mounting screws, support daisy-chaining in multi-gang setups.
  • VERSATILE USE – Requires in-wall installation with hardwired connections – neutral wire REQUIRED. Supports 3-way and other multi-switch configurations when paired with up to four add-on switches – model 46200. The white, toggle-style switch illuminates to identify location and status – wallplate not included. Works with LED, CFL, incandescent, and halogen bulbs and other devices.
  • TRUSTED NETWORK – Zigbee 3. 0 is forward and backward compatible and does not use well-known network keys, which allows reliable, safe home automation. Certified device-to-device interoperability and a proven mesh network eliminate single points of failure while supporting large networks. The smart switch also extends your Zigbee signal by up to 150ft.
SKU: B08428P2MC Category:
14 People watching this product now!

Device detailed description

Your entire home is smarter with the Enbrighten Zigbee In-Wall Smart Switch with QuickFit and SimpleWire . Enjoy extensive control of permanently installed lights, fans and other fixtures when paired with a compatible gateway. For further convenience, the smart switch connects directly to the latest Alexa products, including Echo Studio and Echo Show 10 as well as first- and second-generation Echo Plus, for voice commands. Voice control and remote operation using additional devices is also available through Zigbee-compatible hubs.

Features and specification

Brand Smart devices brand

Integration Supported smart home integration

Interface Smart device connectivity interface

Manufacturer Smart device manufacturer


Country of Origin


Color Available colors

Voltage (V)

Wattage (W)

Item Package Quantity


Batteries Required?

Warranty Description

‎5-year limited

Product Dimensions

‎1.13 x 1.75 x 4.13 inches


Power Source

Switch Style

Certification Smart device certification

Mounting Type



Controller Type

, , ,

Included Components

‎Smart Switch

Item Weight

Control Method

Circuit Type

Connectivity Protocol


Product guides and documentsUser Manual (PDF)

Frequently asked question

Will the switch work with Aluminum wired house?

No, this is UL certified for Copper wiring only.

Does this work with the Xfinity Home hub?


Does this require neutral wire?

Hello Erick, thank you for your question. Yes, a neutral wire is required.

Can I disable the led light indicator of the switch?

Yes. You can set the LED to indicate when it is on, or when it is off, or never. You configure which way it indicates by using a documented pattern of up/down presses. I have one in my garage set to indicate 'on', and another in my foyer where the indicator is disabled.

6 reviews for Enbrighten Zigbee Smart Light Switch with QuickFit and SimpleWire, Pairs Directly with Echo 4th Gen/Echo Show 10 (All)/Echo Studio/Echo Plus (All)/Eero Pro 6, Toggle, White, 43084


87 %


87 %


87 %

Reviewed by 0 customer(s)

Sort by

  • Anonymous

    It works out of the box. Switch isn't silent though.

    Integrated this with my Home Assistant Zigbee setup. Enable join in Zigbee2MQTT before turning the breaker back on. The switch will automatically pair right away with Tasmota. Make sure to connect all wires (ground and neutral) since this is an always-on device. The one thing that’s slightly annoying is the sound of the switch when it’s turned on and off, but I guess the bright side is that it’s also an audible tone that makes troubleshooting easier.

    Verified Purchase

    Share on

  • Anonymous

    Solid ZigBee Switch

    Installs just like any other switch, connects to smart things and works how it should. Wish it didn’t have this blur light on all the time when it’s off though. Some may like that, but I really don’t.

    Verified Purchase

    Share on

  • Anonymous

    Works great,easy to install

    Easy to install, works great with Alexa,and can still use it as a regular switch.

    Verified Purchase

    Share on

  • Anonymous


    So great product but you have to have the show 10 inch 2nd generation which I did not have and had to purchase one

    Verified Purchase

    Share on

  • Anonymous

    Works with Echo 2nd generation Echo plus. No issue.

    I’m totally blind! I had a co-worker come over and hook this up for me. They liked the look of the switch.
    They didn’t have any issue with getting the 4 wires connected. I did have to tell him it isn’t a 3way switch. He had the wire connected to that connection and when I said something he then had to go and remove it. A good thing I said something before we tried turning on the power to that switch.
    Slipped on the breaker! At that point, I said Alexa find new devices. 45 or so seconds she came back and said she found a new light. I knew that was a switch. Tried turning on/off the switch using the Echo and it worked. Then I renamed the new device using the Echo. Alexa rename XXXX light to Patio Light Switch. She came back and asked me if that was what I wanted and I replied WRITE. Done! Echo 2nd generation plus is on the 2nd floor and the patio is off the basement. A lot of Zigbee Plugs and lights between the 2. All act as repeaters.
    Pressed the switch up 3 times quickly and down once to change the way the LED works on the switch. Did that two times to get to the mode that leaves the LED in the switch off all the time. Default is LED on when Switch is off. Second mode LED on when Switch is on. 3rd mode LED off regardless of if the switch is on or off. Then it starts over.

    Verified Purchase

    Share on

  • Anonymous

    Nice Price

    Wiring was a little challenging and it took a few tries to get it connected to my Hubitat but enthralling everything is working fine.

    Verified Purchase

    Share on

Leave feedback about this

Your email address will not be published.